Constant Climate Chamber m360 HPP1060Ceco
With the HPPCeco climate chambers of the m360 Select series, Memmert sets new standards in sustainable climate simulation. Thanks to the energy-efficient Memmert Peltier technology, HPPCeco enables precise control of temperature, humidity and CO₂ - even at low temperatures.
Temperature / Setting temperature range — without light, with humidity: +5 to +70 °C
Temperature / Setting temperature range — without light, without humidity: 0 to +70 °C
Temperature / Working temperature range — without light, with humidity: +5 (at least 20 below ambient temperature) to +70 °C
Temperature / Working temperature range — without light, without humidity: 0 (at least 20 below ambient temperature) to +70 °C
Temperature / Setting accuracy temperature — 0.1 °C
Temperature / Temperature sensor — 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Humidity / Setting range humidity — 10 - 90 % rh
Humidity / Humidity — humidity supply with distilled water from external tank by self-priming pump
Humidity / Humidification — humidification by hot steam generator
Humidity / Setting accuracy humidity — 0.5 % rh
CO2 / Temporal fluctuation — ± 0,4 % CO 2
CO2 / Setting accuracy — 0,1 % CO 2
CO2 / Setting range — 0 to 20 %
Control technology / ControlCOCKPIT — TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Control technology / Language setting — German, English, Spanish, French, Polish, Czech, Hungarian, Italian, Chinese
Control technology / adjustable parameters — temperature (Celsius or Fahrenheit), relative humidity, programme time, time zones, summertime/wintertime
Control technology / Timer — Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Control technology / Function HeatBALANCE — adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 %
Control technology / Function SetpointWAIT — the process time does not start until the set temperature is reached
Control technology / Calibration — three freely selectable values each, temperature/humidity/CO 2
Communication / Documentation — programme stored in case of power failure
Communication / Programming — AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Safety / Temperature control — over- and undertemperature monitor TWW, protection class 3.3
Safety / AutoSAFETY — additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
Safety / Autodiagnostic system — integral fault diagnostics for temperature and humidity control
Safety / Alarm — visual and acoustic
Heating concept / Peltier — energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle)
Standard equipment / Standard works calibration certificate — +25 °C / 60 % rh, +40 °C / 75 % rh, 5 % CO2 at +40 °C / 75 %rh
Standard equipment / Door — fully insulated stainless steel door with 2-point locking (compression door lock)
Standard equipment / Door — Door-open-recognition
Standard equipment / Door — inner glass door
Standard equipment / Standard equipment — CO 2 connection set: hose with coupling and clamp
Standard equipment / Entry Port — Entry port (silicone), 18 mm clear diameter, moisture tight, can be closed by silicone stopper, in the side panel, centre left
Standard equipment / Internals — 2 stainless steel grid(s), electropolished
Standard equipment / Standard accessories — Water tank including connection hose
Stainless steel interior / Dimensions — w (A) x h (B) x d (C) : 1040 x 1200 x 850 mm (d less 32 mm for fan - Peltier)
Stainless steel interior / Volume — 1090 l
Stainless steel interior / Max. number of internals — 14
Stainless steel interior / Max. loading of chamber — 200 kg
Stainless steel interior / Max. loading per internal — 60 kg
Textured stainless steel casing / Dimensions — w (D) x h (E) x d (F) : 1224 x 1720 x 1005 mm (d +56mm door handle & +111mm Peltier element)
Textured stainless steel casing / Installation — on lockable castors
Electrical data / Voltage
Electrical load — 230 V, 50/60 Hz
approx. 1400 W
Electrical data / Voltage
Electrical load — 115 V, 50/60 Hz
approx. 1400 W
