OptiMax Starter Kit and HFCal
The OptiMax 1001 HFCal - a reaction calorimeter for fast and efficient safety studies for process characterization and scale-up.
Temperature Range — -40–180 °C
Operating Volume — 150–1,000 mL
Dimensions (system) — 78 × 39 × 42 cm
Dimensions (thermostat) — 388 × 414 × 539 mm
Weight — 35 kg
Power Requirements — 100–240 VAC, 50/60 Hz
Heating / Cooling — Solid State Thermostat
Precision Heat Transfer — ±3%
Accuracy and Precision Specific Heat — ±10%
Accuracy Heat Flow, Isothermal — ±3–5%
Accuracy Heat Flow, Non-isothermal — ±5–10%
Temperature Modes — Jacket control; reaction mixture control; distillation control; crystallization control
Back / Front Light — Yes / Yes
Calorimetry Type — Heat Flow
Temperature Control — Isothermal and isoperibolic; constant and ramp; reflux, distillation and crystallization
Stirring Speed — 30–1,200 rpm
Reactor — Single-piece or two-piece; 1,000 mL; 50 mbar–1 bar; DURAN glass
Stirrer Options — Pitch blade; anchor; half-moon
Calibration Heater Power — Max. 20 W
Sensitivity — ≤0.1 W standard deviation at steady state; peak-to-peak ≤approximately 0.4 W
HFCal Module Dimensions — 120 × 40 × 170 mm
Data Logging — iControl software; iControl 5.2 or later
System Composition — OptiMax Starter Kit (Material No. 51162830) and HFCal Upgrade (Material No. 30050150)
