Peltier-cooled incubator IPP750eco
Temperature / Setting temperature range — 0 to +70 °C
Temperature / Working temperature range — with light: +10 to +40 °C
Temperature / Working temperature range — without light: from 0 (at least 20 below ambient temperature) to +70°C
Temperature / Setting accuracy temperature — 0.1 °C
Temperature / Temperature sensor — 1 Pt100 sensor DIN class A in 4-wire-circuit
Control technology / Language setting — German, English, Spanish, French, Polish, Czech, Hungarian, Italian, Chinese
Control technology / ControlCOCKPIT — SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
Control technology / Timer — Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Control technology / Function SetpointWAIT — the process time does not start until the set temperature is reached
Control technology / Calibration — three freely selectable temperature values
Control technology / adjustable parameters — temperature (Celsius or Fahrenheit), programme time, time zones, summertime/wintertime
Ventilation / Convection — forced ventilation by Peltier fan
Communication / Documentation — programme stored in case of power failure
Communication / Programming — AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
Safety / Temperature control — adjustable electronic overtemperature monitor and mechanical temperature limiter
Safety / Autodiagnostic system — for fault analysis
Heating concept / Peltier — energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle)
Standard equipment / Works calibration certificate — for +10 °C, +25 °C and +40 °C
Standard equipment / Door — inner glass doors
Standard equipment / Door — fully insulated stainless steel doors with
2-point locking (compression door lock)
Standard equipment / Internals — 2 stainless steel grid(s), electropolished
Stainless steel interior / Dimensions — w (A) x h (B) x d (C) : 1040 x 1200 x 600 mm (d less 32 mm for fan - Peltier)
Stainless steel interior / Volume — 749 l
Stainless steel interior / Max. number of internals — 14
Stainless steel interior / Max. loading of chamber — 200 kg
Stainless steel interior / Max. loading per internal — 30 kg
Textured stainless steel casing / Dimensions — w (D) x h (E) x d (F) : 1224 x 1720 x 755 mm (d +56mm door handle & +111mm Peltier element)
Textured stainless steel casing / Installation — on lockable castors
Textured stainless steel casing / Housing — rear zinc-plated steel
Electrical data / Voltage
Electrical load — 230 V, 50/60 Hz
approx. 1300 W
Electrical data / Voltage
Electrical load — 115 V, 50/60 Hz
approx. 1300 W
Ambient conditions / Set Up — The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Ambient conditions / Ambient temperature — 16 ºC to 40 ºC
Ambient conditions / Humidity rh — max. 70 %, non-condensing
Ambient conditions / Altitude of installation — max. 2,000 m above sea level
Ambient conditions / Overvoltage category — II
Ambient conditions / Pollution degree — 2
Packing/shipping data / Transport information — The appliances must be transported upright
Packing/shipping data / Customs tariff number — 8419 8998
Packing/shipping data / WEEE-Reg.-No. — DE 66812464
Packing/shipping data / Dimensions approx incl. carton — w x h x d: 1330 x 1910 x 1050 mm
Packing/shipping data / Net weight — approx. 208 kg
Packing/shipping data / Gross weight carton — approx. 274 kg
