Paraffin oven UN30pa
Temperature / Setting temperature range — +20 to +80 °C
Temperature / Working temperature range — at least 5 above ambient temperature to +80 °C
Temperature / Setting accuracy temperature — 0.1 °C
Temperature / Temperature sensor — 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control technology / ControlCOCKPIT — TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Control technology / Language setting — German, English, Spanish, French, Polish, Czech, Hungarian, Italian, Chinese
Control technology / Timer — Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Control technology / Function SetpointWAIT — the process time does not start until the set temperature is reached
Control technology / Calibration — three freely selectable temperature values
Control technology / adjustable parameters — temperature (Celsius or Fahrenheit), programme time, time zones, summertime/wintertime
Ventilation / Convection — natural convection
Communication / Documentation — programme stored in case of power failure
Communication / Programming — AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Safety / Temperature control — mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Safety / Temperature control — overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
Safety / AutoSAFETY — additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature
Safety / Autodiagnostic system — for fault analysis
Safety / Alarm — visual and acoustic
Standard equipment / Works calibration certificate — for +80°C
Standard equipment / Door — fully insulated stainless steel door with 2-point locking (compression door lock)
Standard equipment / Internals — 1 stainless steel grid(s), electropolished
Stainless steel interior / Interior — nearly gas-tight interior
Stainless steel interior / Interior — easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Stainless steel interior / Volume — 32 l
Stainless steel interior / Dimensions — w (A) x h (B) x d (C) : 400 x 320 x 250 mm
Stainless steel interior / Max. number of internals — 3
Stainless steel interior / Max. loading of chamber — 60 kg
Stainless steel interior / Max. loading per internal — 20 kg
Textured stainless steel casing / Dimensions — w (D) x h (E) x d (F) : 585 x 704 x 434 mm (d +56mm door handle)
Textured stainless steel casing / Housing — rear zinc-plated steel
Electrical data / Voltage
Electrical load — 230 V, 50/60 Hz
approx. 1600 W
Electrical data / Voltage
Electrical load — 115 V, 50/60 Hz
approx. 800 W
Ambient conditions / Altitude of installation — max. 2,000 m above sea level
Ambient conditions / Ambient temperature — +5 °C to +40 °C
Ambient conditions / Humidity rh — max. 80 %, non-condensing
Ambient conditions / Overvoltage category — II
Ambient conditions / Pollution degree — 2
Packing/shipping data / Transport information — The appliances must be transported upright
Packing/shipping data / Customs tariff number — 8419 8998
Packing/shipping data / Country of origin — Federal Republic of Germany
Packing/shipping data / WEEE-Reg.-No. — DE 66812464
Packing/shipping data / Dimensions approx incl. carton — w x h x d: 660 x 890 x 650 mm
Packing/shipping data / Net weight — approx. 45 kg
Packing/shipping data / Gross weight carton — approx. 61 kg
