PULVERISETTE 5/2 Planetary Mill
The PULVERISETTE 5 classic planetary ball mill, featuring two working stations, enables the rapid and reliable grinding of hard, medium-hard, soft, brittle, viscous, and moist materials down to colloidal fineness—with no loss of sample—thanks to the exceptionally high-energy impact of the grinding balls. Depending on the desired final fineness, the grinding process can be carried out dry, in a suspension, or under an inert gas atmosphere. In addition to grinding, the planetary ball mill can be used for mixing and homogenizing emulsions and pastes, as well as for mechanical activation and alloying in materials science. Technical Data
Operating principle: impact force
Ideally suited for the following material types: hard, medium-hard, soft, brittle, tough, moist
Number of grinding stations: 2
Grinding tools: Grinding bowls and grinding balls
Grinding tool materials: agate, sintered corundum, silicon nitride, zirconium oxide, hardened stainless steel, tungsten carbide
Grinding bowl volumes: 500, 250, 80, 45, 12 ml
Grinding ball diameter: 0.1 – 40 mm
Maximum feed size (material-dependent): 10 mm
Sample quantity: 0.5 – 450 ml
Final fineness (material-dependent): < 1 µm
Typical grinding time to analytical fineness: 4 min
Grinding process: dry/wet
Grinding in inert gas: yes
Gas pressure and temperature measurement: yes
Main disk rotational speed: 50 – 400 rpm
Planetary disk / grinding bowl gear ratio: i relative = 1 : -2.19
Effective diameter of the main disk: ~ 250 mm
Centrifugal acceleration (g = 9.81 m/s²): 22 g
Interfaces: yes
Electrical specifications: 200–240 V/1~, 50–60 Hz, 1730 W
The instrument is also available in the following voltage version: 100–120 V V/1~, 50–60 Hz, 1470 W – article no. 05.6010.00
Sound pressure level at the workplace in accordance with DIN EN ISO 3746 (depending on the material being ground, the grinding bowls/balls, and the selected rotational speed): up to approximately L pAd = 83 dB
Weight: 100 kg
Dimensions (W x D x H): Benchtop unit 58 x 67 x 57 cm
