Max. volume (H2O) 100 l
Motor power input 135 W
Motor power output 84 W
Motor type Brushless DC motor
Speed display TFT
Speed range 0/6 – 2000 rpm
Intermittent operation Yes
Viscosity 100,000 mPas
Max. output power at the stirring element 84 W
Permissible ON time 100%
Max. Torque at the attachment 200 Ncm
Torque I, maximum 200 Ncm
Torque II, maximum 40 Ncm
Speed range I: 6 rpm
Speed range I: 400 rpm
Speed range II: 30 rpm
Speed range II: 2000 rpm
Speed range I: 6 rpm
Speed range I: 400 rpm
Speed range II: 30 rpm
Speed range II: 2000 rpm
Speed control stepless
Speed setting accuracy ±1 rpm
Deviation of measured speed value (n > 300 rpm) ±1%
Deviation of measured speed value (n < 300 rpm) ±3 rpm
Attachment mounting Chuck
Connection for contact thermometer PT1000
Temperature display yes
Chuck diameter (Ø) 10 mm
Chuck clamping range (diameter) 0.5 – 10 mm
Hollow shaft, inner diameter 10.3 mm
Hollow shaft, fully push-through (when at rest) yes
Stand mounting Holder
Attachment diameter 16 mm
Attachment length 220 mm
Torque display yes
Speed control electronic
Nominal torque 2 Nm
Torque measurement Trend
Deviation of measured torque value I ±20 Ncm
Deviation of measured torque value II ±6 Ncm
Timer yes
Display Timer display TFT
Setting range for time 1 – 6000 min
Temperature measurement range -10 – +350 °C
Displayed temperature resolution 0.1 K
Measurement accuracy ±0.5 K + PT1000 accuracy (DIN EN 60751 Class A)
Temperature limit sensor accuracy ≤ ± (0.15 + 0.002x|T|) K
Housing material Coated cast aluminum/thermoplastic polymer
Communication range (building-dependent), max. 150 m
Dimensions 91 x 297 x 231 mm
Weight 4.9 kg
Permissible ambient temperature 5 – 40 °C
Permissible relative humidity 80%
Protection class (DIN EN 60529) IP 40
RS 232 port Yes
USB port Micro-USB
Voltage 230 V
Frequency 50/60 Hz
Power consumption 130 W
Batteries included? Yes
Battery cell type Custom LiPo
Number of batteries 1
Battery weight 55 g
Battery packaging Inside the device
Battery energy content 7.4 Wh
Battery voltage 3.7 V